We provide professional custom design service according to your local building standards, including electrical system, fireproof panels and anti-corrosion treatment.

Custom Design Aligned with Local Building Standards

Modular buildings are deployed across many different countries and regions, each with its own building codes, safety regulations, and environmental requirements. A standard product that works well in one market may need adjustments to comply with the rules of another. To address this, we provide a professional custom design service that aligns our modular houses with your local building standards.

This service covers key technical areas such as electrical system configuration, fireproof panel selection, and anti‑corrosion treatment. By adapting the design to local requirements, we help clients avoid compliance issues and ensure that the delivered units are suitable for their intended location.

Engineered for Local Compliance

Suzhou Taimao Integrated Housing Co., Ltd. specializes in delivering globally certified modular building solutions. Our flagship SIP (Structural Insulated Panel) modular building system integrates structure, insulation, MEP (mechanical, electrical, plumbing), HVAC, interior finishes, and smart home technologies into a single, unified solution. This rapid assembly technology shifts the majority of on‑site construction and finishing work to controlled factory environments.

The custom design process begins with a review of the client's local building standards and project requirements. Our technical team then develops a specification that addresses the relevant compliance points, including:

• Electrical system voltage, wiring, and safety protection
• Fire resistance ratings for panels and structural elements
• Corrosion protection measures for the local environment
• Thermal insulation levels appropriate for the climate zone
• Structural loading requirements for wind and snow

This structured approach ensures that the final product is not only functional but also aligned with the regulatory framework of the destination market.

Electrical System Design

Electrical systems vary significantly between countries. Voltage levels, plug types, circuit protection methods, and grounding requirements differ, and using a non‑compliant system can create safety hazards and fail inspection. Our custom design service includes configuring the electrical system to match local standards, covering:

• Correct voltage and frequency for the destination country
• Appropriate socket and switch types
• Circuit breakers and residual current devices matched to local practice
• Wiring insulation and routing that satisfies safety codes
• Labelling and documentation in the required language

All electrical work is completed in the factory under controlled conditions, and test reports can be provided for verification.

Fireproof Panel Selection

Fire safety is a primary consideration in building codes worldwide, but the specific requirements—such as fire resistance duration, material classifications, and compartmentation rules—vary by jurisdiction. Our custom design service selects fireproof panels and related components that meet the applicable standard for your project.

Depending on the requirement, we can incorporate:

• Fire‑retardant insulation cores
• Non‑combustible surface layers
• Fire‑rated doors and windows
• Intumescent seals and fire stops at penetrations
• Smoke detection and alarm provisions where required

Material certificates and test data can be supplied to support the approval process with local authorities.

Anti‑Corrosion Treatment

Corrosion risk depends on the local environment. Coastal areas, industrial zones, and regions with high humidity or acid rain require more robust protection than dry inland locations. Our custom design service specifies anti‑corrosion treatment based on the site conditions, which may include:

• Hot‑dip galvanizing with increased coating weight
• Epoxy or polyester powder coatings
• Stainless steel fasteners and hardware
• Sealed joints to prevent moisture ingress
• Sacrificial anodes where appropriate

The selected treatment is applied during production, ensuring consistent coverage and long‑term performance.

A Collaborative Design Process

Custom design is a collaborative effort. We work with clients to understand their project location, intended use, and any specific requirements they may have. Our team then prepares design drawings and specifications for review. Clients can provide feedback, and revisions are made until the design meets their expectations.

We also offer sample drawing support at no cost, allowing clients to visualize the proposed configuration before committing to production.

Throughout the process, we maintain clear communication and provide documentation to support local approvals and inspections.

Frequently Asked Questions

How do I share my local building standards with your team?

You can provide the relevant code documents, or simply describe the requirements. Our technical team will review them and incorporate the necessary specifications into the design.

Can you provide electrical systems for any voltage and frequency?

Yes. We can configure the electrical system to match the voltage, frequency, and plug type used in your country, along with the appropriate protection devices.

What fire resistance ratings are available?

We offer a range of fire‑retardant and non‑combustible options. The appropriate choice depends on your local code requirements. We can provide test data for the selected materials.

How is the anti‑corrosion treatment selected?

The treatment is based on the environmental conditions at the project site. For coastal or industrial areas, we recommend more protective systems. Our team will advise on the most suitable option.

Is there an additional cost for custom design?

Basic custom design and sample drawings are provided at no cost. More complex engineering or extensive revisions may be subject to a design fee, which will be communicated in advance.

How long does the custom design process take?

The timeline depends on the complexity of the requirements and the speed of feedback. Typically, initial drawings are prepared within a few business days.

Custom Design Service Overview

The table below summarizes the key elements of our custom design service.

Conclusion

Our professional custom design service helps clients align modular houses with local building standards, covering critical areas such as electrical systems, fireproof panels, and anti‑corrosion treatment. By adapting the design to the destination market, we support smoother approvals, safer installations, and better long‑term performance.

Suzhou Taimao Integrated Housing Co., Ltd. brings together industry‑leading modular design, proprietary manufacturing technologies, and end‑to‑end digital software support to deliver globally certified solutions. Our mission is to accelerate project timelines, boost operational efficiency, minimize ecological impact, and uphold uncompromising standards of quality and safety. The SIP modular building system exemplifies this commitment, providing a unified platform that integrates structure, insulation, MEP, HVAC, interior finishes, and smart home technologies into a single, cohesive package.

We invite you to contact us to discuss your project requirements and to request sample drawings for your custom modular design.